You are here

Salt Water Chlorinator - Pool Chlorine Generator

Salt water chlorinators (Pool Chlorine Generator) use low levels of swimming pool grade salt at a minimum of 4000 ppm ( 15% salinity of sea ).

 

This is electrolyzed using an advanced electronic process to sanitize the pool water. The pool is sanitized automatically even when you are away for extended periods.

 

Saltwater chlorinator units are available to suit most pool applications from small patio pools to large commercial installations. Suitable for all pool surfaces, including concrete, tile, fiberglass and vinyl. Simple to install on any existing or new pool.

 

Saltwater Chlorinator takes care of all your pool's chlorine requirements. It is easy-to-use and maintenance, usually requires the regular removal usually requires the regular removal and cleaning of electrodes

 

Features :

  • Set and forget operation.
  • Self cleaning cell.
  • Digital time switch for automatic operation.
  • LCD display and LED indicators.
  • Tropicalized PCB Coating.
  • Auto delay to allow pump to prime.
  • High flow rate cell.
  • Super chlorinate with ease.
  • Add salt without turning chlorinator off.
  • Mounting bracket for simple installation.
  • Large cell anode and cathode area.
  • Built-in safety sensor.
  • Low salt indicator then lower electrolysis current.
  • Water flow indicator and current cut off.
  • Full length external heat sink.
  • Chlorine output control switch.
  • High grade UV stabilized rust and weather proof cabinet.
  • Most efficient and economical pool sanitizing system.
  • No handling or storing of chlorine.
  • Environmentally friendly - Salt is a natural product.

 

Specification :

Models are available depending of pool size

 

Model Max Output g/h Pool Size M3
 chlo10 10 20
 chlo20 20 50
 chlo30 30 70
 chlo40 40 100

 

Installation and maintenance:

Electrode cell must be installed horizontally and after sand filter. Power box must not be installed directly above any other heat source such as filter pump or heater.

 

It must be at least 300mm from the ground to allow free circulation of air. It is better for power box life if it is mounted in a shady spot and not in direct sunlight.

 

We warranty for a period of 1 year from the date of purchase, defects found to be due to faulty materials or workmanship.

 

We will repair or replace at its option such faulty materials or parts free of charge.

Search form